| Amperage Rating | : | 10.4 A |
| Bearing Type | : | Sleeve |
| Cord Type | : | 3-Wire Neoprene |
| Dimensions | : | 14-5/16 in H |
| Flow Rate | : | 128 gpm |
| Frequency Rating | : | 60 Hz |
| Horsepower | : | 1/2 hp |
| Impeller Type | : | Non-Clogging Vortex |
| Lee_Descr | : | 267-0001 - ZOELLER M267 115V 1/2HP CAST IRON SUBMERSIBLE SEWAGE PUMP |
| Lee_UPC | : | 5351401761 |
| Material | : | Cast Iron |
| Maximum Head | : | 21-1/2 ft |
| Motor Speed | : | 1750 rpm |
| Outlet Size | : | 2 or 3 in NPT |
| Phase | : | 1 |
| Series | : | Waste-Mate 260 |
| Temperature Rating | : | 130 deg F |
| UPC_Lee | : | 5351401761 |
| Voltage Rating | : | 115 V AC |
| Weight | : | 47.5 lb |
| Width | : | 11.0 in |
| Length | : | 13.5 in |
| Height | : | 16.25 in |
Our Best Seller in sewage pumps, the fully automatic Model M267 Sewage Pump is designed to remove raw sewage and wastewater in sewage ejector applications. The professional-grade, 1/2 HP M267 is a time-tested and reliable sewage pump. Known as the "Waste-Mate," the M267 is a fully automatic float-operated sewage pump. The white polypropylene float is solid so it cannot become waterlogged. This ensures that it is always buoyant and able to turn the pump on when necessary. The pump's vortex impeller allows it to pass 2" spherical solids. The impeller's clearance in relation to the pump housing allows water and solids to pass freely through the pump. This combination of design features lessens the chance of clogging and downtime. The Model 267's switch case, motor housing, pump housing, and base are each constructed of cast iron. The pump's identification tag, float guard, handle, switch arm, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 267 is able to withstand the most demanding sewage ejector applications. Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.
Zoeller® Submersible Pump, Series: Waste-Mate 260, 128 gpm, 2 or 3 in NPT Outlet, 21-1/2 ft Maximum Head, 1/2 hp, 115 V AC, 10.4 A, 60 Hz Frequency, 1 ph, 1750 rpm Motor, 3-Wire Neoprene Cord, Non-Clogging Vortex Impeller, 130 deg F, Sleeve Bearing, Cast Iron, 14-5/16 in H Dimensions
- Oil-filled motor and cast iron motor housing for optimal heat dissipation which prevents the pump from overheating
- Automatic pump with a time-tested, reliable, preset, built-in snap action switch that makes for easy installation
- Corrosion resistant engineered plastic vortex impeller to allow free passage of 2 in spherical solids which prevents clogging and increases reliability
- Stainless steel float guard that prevents material or debris from collecting on the float ensuring proper operation every time
- Solid, buoyant, polypropylene float to eliminate the possibility of water infiltration allowing the float to remain buoyant and functional at all times
- Powder-coated epoxy finish provides corrosion-resistance and extends the life of the pump in harsh environments
- Stainless steel screws, switch arm, guard, handle and hardware to prevent rust and corrosion over the life of the pump
- 100 Percent Factory Tested - every pump is submerged in water and tested at the factory to ensure that it performs as expected when you receive it