| Dimensions | : | 2.2712 in W x 2.1472 in H |
| Finish | : | Galvanized |
| Lee_Descr | : | 525-162PB - SIOUX CHIEF STRONG ARM W/ TWO PLASTIC PEX BENDS |
| Lee_UPC | : | 73923626732 |
| Load Capacity | : | 25 lb |
| Material | : | Steel |
| Series | : | 525-PB |
| Temperature Rating | : | 140 deg F |
| Thickness | : | 16 ga |
| UPC_Lee | : | 73923626732 |
| Weight | : | 0.68 lb |
Sioux Chief 525-PB series StrongArm™ with Plastic Bend Support preassembled bracketing system shall be used when penetrating a wall with 1/2 in PEX. Brackets shall be corrosion-resistant and secured to wood or metal studs with approved hardware. System shall include plastic bend (elbow) device that swivels 360 degree when captured within a LockBlock™ assembly. Plastic Bend Support shall slide across pair of parallel brackets allowing installer to secure 1/2 in PEX tube at any desired location within the stud cavity. Bracket assembly with Plastic Bend Support devices and bulk components shall be IAPMO listed.
Sioux Chief StrongArm™ Twisted Bracket, Series: 525-PB, 25 lb, 16 ga Thickness, Steel, Galvanized, 2.2712 in W x 2.1472 in H, 140 deg F
- Use when stubbing out with 1/2 in flexible CTS tube
- StrongArm™ brackets provide a very rigid installation
- Plastic elbow swivels 360 deg to work with tubing coming from any direction
- PEX Bend LockBlock™ are pre-assembled on each pair of brackets
- Position stub outs at any desired location within the stud bay
- When screw on blocks are tightened, blocks compress on tube, brackets and elbow eliminating all movement
- Twisted brackets mount to face of stud, and L-bent brackets mount inside stud cavity
- For 16 in stud bay
- (2) Plastic PEX bend support
