| Domestic/Import |
: |
Import |
| End Style |
: |
PEX Barb |
| Lee_Descr |
: |
UP412 - SHARKBITE PEX-B TEE 3/4IN X 3/4IN X 1/2IN POLY WP CRIMP |
| Lee_UPC |
: |
69728599001 |
| Material |
: |
Poly-Alloy |
| Nominal Size |
: |
3/4 x 3/4 x 1/2 in |
| UPC_Lee |
: |
69728599001 |
| Weight |
: |
0.02 lb |
| Width |
: |
1.63 in |
| Length |
: |
1.63 in |
| Volume |
: |
1.19 cu-in |
| Height |
: |
1.63 in |
SharkBite®'s PEX Poly Alloy Barb Reducing Tees come in a variety of different sizes and allow for pipe-size reduction in multiple ways. The SharkBite® PEX Barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system, or a copper crimp ring system as well (each sold separately).
Sharkbite®, UP412, Reducing Tee, 3/4 x 3/4 x 1/2 in Nominal, PEX Barb End Style, Poly-Alloy, Import
Broad line of fittings, manifolds, regulator, thermostatic and ball valves: A typical barb system offers the lowest material costClamp ring connections: The time saving clamp rings and tool offer reduced equipment cost, one tool clamps all sizes and the necessity to check each fitting ring with a go/no-go gauge is eliminatedCrimp ring connections: Copper crimp rings and the heavy duty tool with interchangeable jaws, does not require calibration and allows each joint to be checked with a go/no-go gaugeAdvanced polymer solution for when corrosion may affect DZR brass productsCan be used with either SharkBite® clamp rings or SharkBite® crimp ringsASTM F2159 specification for plastic insert fittings utilizing a copper crimp ring for SDR9 cross-linked polyethylene (PEX) tubing and SDR9 polyethylene of raised temperature (PE-RT) tubing
