| Amperage Rating | : | 12 A Full Load/47.5 A Locked Rotor |
| Automatic/Non Automatic | : | Automatic |
| Bearing Type | : | Upper Ball/Lower Ball |
| Cord Type | : | SJTW 10 ft |
| Frequency Rating | : | 60 Hz |
| Horsepower | : | 1 hp |
| Impeller Type | : | Cast Iron |
| Lee_Descr | : | PRG101A - LIBERTY 1HP GRINDER PUMP PRG SERIES 1PH 115V 2IN DISCHARGE 10FT CORD AUTO |
| Lee_UPC | : | 67181212126 |
| Material | : | Cast Iron |
| Maximum Flow Rate | : | 44 gpm |
| Maximum Head | : | 50 ft |
| Motor Speed | : | 3450 rpm |
| Outlet Size | : | 2 in FNPT |
| Phase | : | 1 |
| Rated Head | : | 30 ft |
| Series | : | PRG |
| Service Factor | : | 1 |
| Temperature Rating | : | 221 deg F Thermal Overload |
| Type | : | 1-Stage |
| UPC_Lee | : | 67181212126 |
| Voltage Rating | : | 115 V AC |
| Weight | : | 58.0 lb |
| Width | : | 10.0 in |
| Length | : | 13.5 in |
| Height | : | 22.0 in |
Designed for sewage applications. Higher flow rates allow use with 2 in discharge lines. Operates on standard 115 or 230 V 20 A circuits.
Liberty Pumps®, PRG101A, 1-Stage, Series: PRG, 44 gpm Maximum, 30 ft Rated Head, Automatic/Non Automatic: Automatic, 2 in FNPT Outlet, 50 ft Maximum Head, 1 hp, 115 V AC, 12 A Full Load/47.5 A Locked Rotor, 60 Hz Frequency, 1 ph, 3450 rpm Motor, SJTW 10 ft Cord, 1 Service Factor, Cast Iron Impeller, 221 deg F Thermal Overload, Upper Ball/Lower Ball Bearing
- Higher flow rates allow use with 2 in discharge lines
- Heavy cast iron construction
- Shreds difficult solds that can jam a solids-handling style pump
- Hardened stainless steel cutter and plate
- Oil-filled, thermally protected motor
- Unitized silicon carbide shaft seal
- Quick-connect
