| Dimensions | : | 4.928 in |
| Domestic/Import | : | Domestic |
| Fitting/Connector Type | : | Cap |
| Lee_Descr | : | QC-104 - FERNCO 4IN QWIK CAP IPS |
| Lee_UPC | : | 1857801661 |
| Length | : | 1.649 in |
| Material | : | PVC |
| Nominal Size | : | 4 in |
| Series | : | QC Series |
| Temperature Rating | : | -30 to 180 deg F |
| UPC_Lee | : | 1857801661 |
| Weight | : | 0.49 lb |
Qwik Caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs. Made of flexible PVC, their durability causes them to be suitable for above-ground or under-ground use. To install, simply place over open end of pipe and tighten to 60 in lbs. of torque. Remember to hand tighten when installing on corrugated pipe.
Fernco® Qwik Cap, Series: QC Series, Fitting/Connector Type: Cap, 4 in Nominal, 1.649 in Length, PVC, -30 to 180 deg F, 4.928 in, Domestic
- Fast, easy installation
- Permanent or temporary cap
- Suitable for above or below ground use as an permanent solution to cap pipe ends, test pipes and cleanouts
- Low cost and reusable
- Convex face minimizes ballooning
- Flexible PVC gasket complying to ASTM D 5926
- 300 series stainless steel clamp
- 60 in lb installation torque
- Flexible PVC 60 duro shore a
- 4.3 psi tested pressure
- Fits 4 in plastic, 4 in cast iron, 4 in copper, 4 in steel, 4 in triplastice wall