85927
Bradford White® RG250T6N Gas Water Heater, 40000 Btu/hr Heating, 50 gal Tank, Natural Gas Fuel, Atmospheric Vent, 43 gph Recovery, Domestic
Manufacturer: Bradford White
Brand: Bradford White®
Lee Supply #: 85927
Manufacturer Part #: RG250T6N
UPC: 67163279169
Customer Part #:
Sold As: EACH
Oversize
Carmel
| Dimensions | : | 22 in Dia x 25-1/2 in D x 60-5/16 in H |
| Domestic/Import | : | Domestic |
| Energy Factor | : | 0.63 |
| Fuel Type | : | Natural Gas |
| Gas Connection | : | 1/2 in |
| Heating Capacity | : | 40000 Btu/hr |
| Ignition Type | : | Piezo |
| Lee_Descr | : | BRADFORD WHITE - 50 GALLON TALL GAS WATER HEATER SAFETY SYSTEM - 40000 BTU RG250T6N |
| Lee_UPC | : | 67163279169 |
| Pressure Rating | : | 150 psi |
| Recovery Rate | : | 43 gph |
| Tank Capacity | : | 50 gal |
| UPC_Lee | : | 67163279169 |
| Ultra Low NOx | : | No |
| Vent Size | : | 3 x 4 in |
| Vent Type | : | Atmospheric |
| Water Connection | : | 3/4 in NPT |
| Weight | : | 160.0 lb |
| Width | : | 23.19 in |
| Length | : | 24.5 in |
| Height | : | 59.5 in |
Bradford White Defender Safety System®, 50 Gallon Tall Residential Gas (Natural) Atmospheric Vent Water Heater. 6-Year Tank Warranty, 40,000 BTU/Hr.
Bradford White® Gas Water Heater, 40000 Btu/hr Heating, Natural Gas Fuel, 1/2 in Gas Connection, 50 gal Tank, Piezo Ignition, Atmospheric Vent, 3 x 4 in Vent, 43 gph Recovery Rate, 0.63 Energy Factor, 3/4 in NPT Water Connection, 150 psi Pressure, Ultra Low Nox: No, 22 in Dia x 25-1/2 in D x 60-5/16 in H Dimensions, Domestic
- Bradford White® ICON System™: Intelligent gas control with proven millivolt powered technology and built-in piezo igniter off the shelf thermopile converts heat energy from the pilot flame into electrical energy to operate the gas valve and microprocessor, no need for external electricity
- Enhanced performance: Proprietary algorithms provide enhanced first hour delivery rating and tighter temperature differentials
- Advanced temperature control system: Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
- Intelligent diagnostics: An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting
- Pilot on indication: Flashing green led provides positive indication that pilot is on
- Separate immersed thermowell: High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve
- Advanced ScreenLok® technology flame arrester design: Flame arrester is designed to prevent ignition of flammable vapor outside of the water heater
- Resettable thermal switch: Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapors burning inside of the combustion chamber or restricted air flow
- Maintenance free: No regular cleaning of air inlet openings or flame arrester is required under normal conditions
- Sight window: Offers a view into the combustion chamber to observe the operation of the pilot and burner
- Factory installed Hydrojet® total performance system: Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank
- Vitraglas® lining
- Insulation system: Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity
- Pedestal base
- Water connections: 3/4 in NPT factory installed true dielectric fittings
- Factory installed heat traps
- Protective magnesium anode rod
- 3 x 4 in "Snap Lock" draft diverter: Allows either 3 or 4 in vent connections with inputs of 40000 Btu/hr or less, over 40000 Btu/hr has the 4 in "Snap Lock" draft diverter
- Low restriction brass drain valve: Durable tamper proof design
- FVIR defender safety System®
